Behringer X32 über Midi per Logic Pro steuern
Verfasst: 18.03.2014, 13:23
Hallo Leute,
ich habe eine Frage und zwar: ich will über einen Midi Befehl beim Pult Behringer X32 einen Channel oder Mute Group muten, mit der Firmware Version 2.02 sollte es ja gehen, soweit so gut. Nur bin ich mit Midi leider nicht so bewandt um mir diese Befehl zu entschlüsseln:
MIDI Control for Fader, Mute and Pan
• Channel/Bus faders, mute and pan control positions can be transmitted and received via the
physical MIDI I/O port or Card MIDI (X-USB or X-UF cards installed)
• Individual flags on the Setup/remote tab allow to configure the parameters for TX/RX
• Fader information is transmitted on MIDI CH01, Status 176 (xB0), CC# 0...79, 0/95/127
• Mute on MIDI CH02, Status 177 (xB1), CC# 0...79, 0/127 (Mute off/Mute on)
• Pan on MIDI CH03, Status 178 (xB2), CC# 0...79, 1/64/127
• midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
Vor allem geht es um diesen: Mute on MIDI CH02, Status 177 (xB1), CC# 0...79, 0/127 (Mute off/Mute on)
Was muss ich da in Logic einstellen?
Hoffe es kann mir jemand hier helfen!
Danke im Voraus
lg
ich habe eine Frage und zwar: ich will über einen Midi Befehl beim Pult Behringer X32 einen Channel oder Mute Group muten, mit der Firmware Version 2.02 sollte es ja gehen, soweit so gut. Nur bin ich mit Midi leider nicht so bewandt um mir diese Befehl zu entschlüsseln:
MIDI Control for Fader, Mute and Pan
• Channel/Bus faders, mute and pan control positions can be transmitted and received via the
physical MIDI I/O port or Card MIDI (X-USB or X-UF cards installed)
• Individual flags on the Setup/remote tab allow to configure the parameters for TX/RX
• Fader information is transmitted on MIDI CH01, Status 176 (xB0), CC# 0...79, 0/95/127
• Mute on MIDI CH02, Status 177 (xB1), CC# 0...79, 0/127 (Mute off/Mute on)
• Pan on MIDI CH03, Status 178 (xB2), CC# 0...79, 1/64/127
• midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
Vor allem geht es um diesen: Mute on MIDI CH02, Status 177 (xB1), CC# 0...79, 0/127 (Mute off/Mute on)
Was muss ich da in Logic einstellen?
Hoffe es kann mir jemand hier helfen!
Danke im Voraus
lg